Viewing Miscellaneous SettingsTo view the Miscellaneous Settings screen, perform the following steps:1 Turn on, or restart your system.2 Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and thenrestart your system and try again.3 On the System Setup Main Menu screen, click System BIOS.4 On the System BIOS screen, click Miscellaneous Settings.Related linkMiscellaneous SettingsMiscellaneous Settings detailsMiscellaneous Settings detailsThe Miscellaneous Settings screen details are explained as follows:Option DescriptionSystem Time Enables you to set the time on the system.System Date Enables you to set the date on the system.Asset Tag Specifies the asset tag and enables you to modify it for security and tracking purposes.Keyboard NumLock Enables you to set whether the system boots with the NumLock enabled or disabled. This option is set to On bydefault.NOTE: This option does not apply to 84-key keyboards.F1/F2 Prompt onErrorEnables or disables the F1/F2 prompt on error. This option is set to Enabled by default. The F1/F2 prompt alsoincludes keyboard errors.Load Legacy VideoOption ROMEnables you to determine whether the system BIOS loads the legacy video (INT 10H) option ROM from the videocontroller. Selecting Enabled in the operating system does not support UEFI video output standards. This field isavailable only for UEFI boot mode. You cannot set the option to Enabled if UEFI Secure Boot mode is enabled.Related linkMiscellaneous SettingsViewing Miscellaneous SettingsiDRAC Settings utilityThe iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable variousiDRAC parameters by using the iDRAC settings utility.NOTE: Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License upgrade.For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.Related linkDevice SettingsSystem BIOSEntering the iDRAC Settings utilityChanging the thermal settingsPre-operating system management applications 57
