Steps1 Align the slots on the system cover with the tabs on the chassis.2 Push the system cover latch down to move the system cover into the closed position.The system cover slides forward and the slots on the system cover engage with the tabs on the chassis. The system cover latch locksinto place when the system cover is completely engaged with the tabs on the chassis.3 Rotate the latch release lock clockwise to the locked position.Figure 15. Installing the system cover1 system cover 2 latch3 latch release lockNext steps1 If removed, install the front bezel.2 Reconnect the peripherals and connect the system to the electrical outlet.3 Turn on the system, including any attached peripherals.Related linkSafety instructionsBefore working inside your systemAfter working inside your systemRemoving the system coverInside the systemCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simplerepairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damagedue to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that areshipped with your product.NOTE: Components that are hot swappable are marked orange, and touch-points on the components are marked blue.66 Installing and removing system components
