Viewing Network SettingsTo view the Network Settings screen, perform the following steps:1 Turn on, or restart your system.2 Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and thenrestart your system and try again.3 On the System Setup Main Menu screen, click System BIOS.4 On the System BIOS screen, click Network Settings.Related linkNetwork SettingsNetwork Settings screen detailsNetwork Settings screen detailsThe Network Settings screen details are explained as follows:Option DescriptionPXE Device n (n = 1to 4)Enables or disables the device. When enabled, a UEFI boot option is created for the device.PXE Device nSettings(n = 1 to 4)Enables you to control the configuration of the PXE device.Related linkNetwork SettingsViewing Network SettingsUEFI iSCSI SettingsYou can use the iSCSI Settings screen to modify iSCSI device settings. The iSCSI Settings option is available only in the UEFI boot mode.BIOS does not control network settings in the BIOS boot mode. For the BIOS boot mode, the option ROM of the network controllerhandles the network settings.Viewing UEFI iSCSI SettingsTo view the UEFI iSCSI Settings screen, perform the following steps:1 Turn on, or restart your system.2 Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and thenrestart your system and try again.3 On the System Setup Main Menu screen, click System BIOS.4 On the System BIOS screen, click Network Settings.5 On the Network Settings screen, click UEFI iSCSI Settings.Pre-operating system management applications 41
