Running the System Diagnostics 175Using the Custom Test OptionsWhen you select Custom Test in the Main Menu window, the Customizewindow allows you to select the device(s) to be tested, select specific optionsfor testing, and view the test results.Selecting Devices for TestingThe left side of the Customize window lists devices that can be tested. Clickthe (+) next to a device or module to view its components. Click (+) on anycomponent to view the tests that are available. Clicking a device, rather thanits components, selects all of the components of the device for testing. If anitem is grayed-out and you wish to run that test, you can select it byhighlighting the item and pressing the spacebar.NOTE: After you select all the devices and components that you want to test,highlight All Devices and then click Run Tests.Selecting Diagnostics OptionsFrom the Diagnostics Options area, select the test(s) you want to run on adevice.• Non-Interactive Tests Only — Runs only tests that require no userintervention.• Quick Tests Only — Runs only the quick tests on the device.• Show Ending Timestamp — Time stamps the test log.• Test Iterations — Selects the number of times the test is run.• Continue on Failure — Enables the tests to continue without userintervention in the event that one of the tests has failed.• Log output file pathname — Enables you to specify the diskette drive orUSB memory key where the test log file is saved. You cannot save the file toa hard drive.Information Displays test results.Testing Option Function
