Figure 64. Removing and installing a processor1. pin-1 indicator of processor 2. processor3. slot (2) 4. processor shield5. socket lever 6. socket keys (2)7. socketNext steps1. Install the processor.2. Install the heat sink.3. Follow the procedure listed in the After working inside your system section.Related tasksRemoving the cooling shroud on page 65Installing the processor on page 108Removing the heat sink on page 105Installing the heat sink on page 110Installing the cooling shroud on page 66Installing the processorPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting andsimple repairs as authorized in your product documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and followthe safety instructions that are shipped with your product.NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dellcertified service technicians.1. Ensure that you follow the Safety instructions.108 Installing and removing system components
