Figure 35. Installing a 3.5-inch hard drive adapter into a hot swappable hard drive carrier1. 3.5-inch hot swappable hard drive carrier 2. screw (5)3. hard drive adapter 4. 2.5-inch hard driveNext stepsInstall the 3.5-inch hot swappable hard drive carrier into the system.Related tasksInstalling a 2.5-inch hot swappable hard drive into a 3.5-inch hard drive adapter on page 75Installing a hot swappable hard drive carrier on page 74Removing a 3.5-inch hard drive adapter from a 3.5-inchhot swappable hard drive carrierPrerequisites1. Follow the safety guidelines listed in the Safety instructions section.2. Keep the Phillips #2 screwdriver ready.3. Remove the 3.5-inch hot swappable hard drive carrier from the system.Steps1. Remove the screws from the rails on the 3.5-inch hot swappable hard drive carrier.2. Lift the 3.5-inch hard drive adapter out of the 3.5-inch hot swappable hard drive carrier.Figure 36. Removing a 3.5 inch hard drive adapter from a hard drive carrier.1. 3.5-inch hot swappable hard drive carrier 2. screw (5)3. 3.5-inch hard drive adapter 4. 2.5-inch hot swappable hard driveInstalling and removing system components 77
