Table 4. LCD panel features (continued)Item Button Description• Press and hold the button to increase scrolling speed.• Release the button to stop.NOTE: The display stops scrolling when the button is released. After 45seconds of inactivity, the display starts scrolling.Viewing Home screenThe Home screen displays user-configurable information about the system. This screen is displayed during normal system operation whenthere are no status messages or errors. When the system turns off and there are no errors, LCD enters the standby mode after fiveminutes of inactivity. Press any button on the LCD to turn it on.Steps1. To view the Home screen, press one of the three navigation buttons (Select, Left, or Right).2. To navigate to the Home screen from another menu, complete the following steps:a. Press and hold the navigation button till the up arrow is displayed.b. Navigate to the using the up arrowc. Select the Home icon.d. On the Home screen, press the Select button to enter the main menu.Setup menuNOTE: When you select an option in the Setup menu, you must confirm the option before proceeding to the next action.Option DescriptioniDRAC Select DHCP or Static IP to configure the network mode. If Static IP is selected, the available fields are IP,Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable DNS and to view domain addresses. Twoseparate DNS entries are available.Set error Select SEL to view LCD error messages in a format that matches the IPMI description in the SEL. This enablesyou to match an LCD message with an SEL entry.Select Simple to view LCD error messages in a simplified user-friendly description. For more information abouterror messages, see the Dell Event and Error Messages Reference Guide at Dell.com/openmanagemanuals >OpenManage software.Set home Select the default information to be displayed on the Home screen. See View menu section for the options andoption items that can be set as the default on the Home screen.View menuNOTE: When you select an option in the View menu, you must confirm the option before proceeding to the next action.Option DescriptioniDRAC IP Displays the IPv4 or IPv6 addresses for iDRAC8. Addresses include DNS (Primary and Secondary), Gateway,IP, and Subnet (IPv6 does not have Subnet).MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.Name Displays the name of the Host, Model, or User String for the system.Number Displays the Asset tag or the Service tag for the system.Power Displays the power output of the system in BTU/hr or Watts. The display format can be configured in the Sethome submenu of the Setup menu.16 About the Dell PowerEdge T330 system
