Figure 88. Removing the optional VGA module1. VGA module 2. control panel3. hook (2) 4. VGA connector on the control panel boardNext steps1. Install the VGA module.2. Follow the procedure listed in the After working inside your system section.Related tasksRemoving the control panel assembly on page 124Removing the control panel assembly cover on page 127Installing the optional VGA module on page 133Installing the optional VGA modulePrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting andsimple repairs as authorized in your product documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and followthe safety instructions that are shipped with your product.1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.Steps1. Align the slots on the VGA module with the VGA connector and hooks on the control panel board.2. Press the VGA module until the hooks snap into place.Installing and removing system components 133
