Subsystem RACADM CommandGeneral System/RAC information getsysinfoSession information getssninfoSensor information getsensorinfoSwitches information (IO Module) getioinfoMezzanine card information (Daughter card) getdcinfoAll modules information getmodinfoPower budget information getpbinfoKVM information getkvminfoNIC information (CMC module) getniccfgRedundancy information getredundancymodeTrace log information gettracelogRAC event log getraclogSystem event log getselDownloading SNMP Management Information Base (MIB) FileThe CMC SNMP MIB file defines the chassis types, events, and indicators. CMC enables you to download the MIB fileusing the web interface.To download the CMC's SNMP Management Information Base (MIB) file using the CMC web interface:1. In the left pane, click Chassis Overview → Network → Services → SNMP.2. In the SNMP Configuration section, click Save to download the CMC MIB file to your local system.For more information about the SNMP MIB file, see theDell OpenManage Server Administrator SNMP ReferenceGuide at dell.com/support/manuals.First Steps to Troubleshoot a Remote SystemThe following questions are commonly used to troubleshoot high-level issues in the managed system:• Is the system turned on or turned off?• If turned on, is the operating system functioning, not responding, or stopped functioning?• If turned off, did the power turn off unexpectedly?Power TroubleshootingThe following information helps you to troubleshoot power supply and power-related issues:• Problem: Configured the Power Redundancy Policy to AC Redundancy, and a Power Supply Redundancy Lostevent was raised.– Resolution A: This configuration requires at least one power supply in side 1 (the left two slots) and onepower supply in side 2 (the right two slots) to be present and functional in the modular enclosure.Additionally the capacity of each side must be enough to support the total power allocations for the170
