3. To use a server’s host name as slot name, select the Use Host Name for the Slot name option. This overrides thestatic slot names with the server’s Host Name (or system name), if available. This requires the OMSA agent to beinstalled on the server. For more information about the OMSA agent, see theDell OpenManage ServerAdministrator User's Guide available at dell.com/support/manuals.4. To save the settings, click Apply.To restore the default slot name (SLOT-01 through SLOT-4) on the basis of a server's slot position) to a server, clickRestore Default Value.Configuring iDRAC Network SettingsTo use this feature, you must have an Enterprise License. You can configure the iDRAC network configuration setting ofa server. You can use the QuickDeploy settings to configure the default iDRAC network configuration settings and rootpassword for severs that are installed later. These default settings are the iDRAC QuickDeploy settings.For more information about iDRAC, see theiDRAC7 User’s Guide at dell.com/support/manuals.Configuring iDRAC QuickDeploy Network SettingsUse the QuickDeploy Settings to configure the network settings for newly inserted servers.To enable and set the iDRAC QuickDeploy settings:1. In the left pane, click Server Overview → Setup → iDRAC .2. On the Deploy iDRAC page, in the QuickDeploy Settings section, specify the settings mentioned in the followingtable. For more information about the fields, see theOnline Help.Table 8. QuickDeploy SettingsSetting DescriptionQuickDeploy Enabled Select the option to enable the QuickDeploy feature thatautomatically applies the iDRAC settings configured onthis page to the newly inserted servers. The autoconfiguration must be confirmed locally on the LCDpanel.Set iDRAC Root Password on Server Insertion Select the option to change iDRAC root password tomatch the value provided in the iDRAC Root Passwordfield, when a server is inserted.iDRAC Root Password When the Set iDRAC Root Password on Server Insertionand QuickDeploy Enabled options are selected, thispassword value is assigned to a server's iDRAC rootuser password when the server is inserted into achassis. The password can have 1 to 20 printable(including white spaces) characters.Confirm iDRAC Root Password Allows you to retype the password provided in thePassword field.Enable iDRAC LAN Enables or disables the iDRAC LAN channel. By default,this option is cleared.Enable iDRAC IPv4 Enables or disables IPv4 on iDRAC. By default, thisoption is selected.80
