58 Using the System Setup Program and UEFI Boot Manager• Provides text console redirection for system setup, text-based utilities,and operating system consolesNOTE: To remotely access the BMC through the integrated NIC, you must connectthe network connection to integrated NIC1.For additional information on using BMC, see the documentation for theBMC and systems management applications.Entering the BMC Setup Module1 Turn on or restart your system.2 Press <Ctrl>> when prompted after POST.If your operating system begins to load before you press <Ctrl>>,allow the system to finish booting, and then restart your systemand try again.iDRAC Configuration UtilityThe iDRAC Configuration Utility is a pre-boot configuration environmentthat allows you to view and set parameters for the optional iDRAC6 and forthe managed server. The iDRAC Configuration Utility enables you to:• Configure, enable, or disable the iDRAC6 local area network (LAN)through the dedicated iDRAC6 Enterprise card port or theembedded NICs.• Enable or disable IPMI over LAN.• Enable a LAN Platform Event Trap (PET) destination.• Attach or detach the Virtual Media devices.• Change the administrative username and password andmanage user privileges.• View System Event Log (SEL) messages or clear messages from the log.For additional information on using iDRAC6, see the documentation foriDRAC6 and systems management applications.Entering the iDRAC Configuration Utility1 Turn on or restart your system.2 Press <Ctrl>> when prompted during POST.
