Installing System Components 8712 Start up the system, press to enter the System Setup program,and check the System Memory settings on the main System Setup screen.The system should have already changed the value to reflect the newlyinstalled memory.13 If the value is incorrect, one or more of the memory modules may not beinstalled properly. Repeat step 2 through step 12 of this procedure,checking to ensure that the memory modules are firmly seated in theirsockets.14 Run the system memory test in the system diagnostics. See "Running theEmbedded System Diagnostics" on page 148.Removing Memory ModulesWARNING: The memory modules are hot to the touch for some time after thesystem has been powered down. Allow time for the memory modules to coolbefore handling them. Handle the memory modules by the card edges and avoidtouching the components on the memory module.CAUTION: Many repairs may only be done by a certified service technician.You should only perform troubleshooting and simple repairs as authorized inyour product documentation, or as directed by the online or telephone serviceand support team. Damage due to servicing that is not authorized by Dell is notcovered by your warranty. Read and follow the safety instructions that camewith the product.1 Turn off the system, including any attached peripherals, and disconnectthe system from the electrical outlet.2 Open the system. See "Opening the System" on page 64.3 Remove the cooling shroud. See "Removing the Cooling Shroud" onpage 66.4 Locate the memory module sockets. See Figure 6-1.
