Dell PowerVault MD3200i Owner's Manual

Also see for PowerVault MD3200i Series: Manual Update Rack Installation Instructions User guide Support Matrix

Contents

Dell PowerVault MD3200i Owner's Manual Manual pdf 270 page image

270 Troubleshooting: Your Array• Hard drives• RAID controller modules• Power supply/cooling fan modules• Control panel• Backplane3 Let the system dry thoroughly for at least 24 hours.4 Reinstall the components you removed in step 2.5 Connect all the cables and turn on the array.If the array does not start properly, see "Getting Help" on page 273.Troubleshooting a Damaged ArrayCAUTION: Many repairs may only be done by a certified service technician.You must only perform troubleshooting and simple repairs as authorized inyour product documentation, or as directed by the online or telephone serviceand support team. Damage due to servicing that is not authorized by Dell is notcovered by your warranty. Read and follow the safety instructions that camewith the product.1 Ensure that the following components are properly installed:• Hard drives• RAID controller module s• Power supply/cooling fan modules• Control panel• Backplane2 Ensure that all the cables are properly connected and that there are nodamaged pins in the connectors.3 Run diagnostics available in Dell PowerVault Modular Disk (MD) StorageManager software. In the AMW, select a component in the Physical paneof the Physical tab. Select Advanced Troubleshooting RunDiagnostics.If the test fails, see "Getting Help" on page 273.