68 Configuration: About Your Storage ArrayNOTE: When adding a storage array using in-band management with iSCSI, asession must first be established between the initiator on the host server andthe storage array. For more information, see "Configuration: Using iSCSI" onpage 83.NOTE: The host agent must be restarted before in-band managementcommunication can be established. See "Starting or Restarting the HostContext Agent Software" on page 260.3 Click Add.4 Use one of these methods to name a storage array:• In the EMW, select the Setup tab, and select Name/Rename StorageArrays.• In the AMW, select the Setup tab, and select Rename Storage Array.• In the EMW, right-click the icon corresponding to the array and selectRename.Setting Up Your Storage ArrayA list of initial setup tasks is displayed on the Setup tab in the AMW. The listof initial setup tasks shows you how to set up a storage array. Using the stepsoutlined in the Initial Setup Tasks Area, ensures that the basic setup steps arecompleted properly.Use the Initial Setup Tasks list the first time that you set up a storage array toperform these tasks:• Locate the storage array—Find the physical location of the storage array onyour network by turning on the unit identify LEDs. The storage array canbe identified with a label.• Give a new name to the storage array—Use a unique name that identifieseach storage array.• Set a storage array password—Configure the storage array with a passwordto protect it from unauthorized access. MDSM prompts for the passwordwhen an attempt is made to change the storage array configuration, suchas, when a virtual disk is created or deleted.• Configure iSCSI host ports—Configure network parameters for eachiSCSI host port automatically or specify the configuration information foreach iSCSI host port.
