Dell PowerVault TL2000 Reference Manual

Also see for PowerVault TL2000: Getting started guide User guide Faq Quick start guide User guide

Contents

B6h SEND VOLUME TAG 30 secondsA4h SET TIMESTAMP 30 seconds00h TEST UNIT READY 10 seconds3Bh WRITE BUFFER 3 minutes 5Notes:1. The Initialize Element Status time-out assumes a fully populated unit.2. The Initialize Element Status With Range time-out assumes a fully populated unit.3. The Move Medium command assumes a move from one storage element to the data transfer elementor vice versa. If the cartridge has not been unloaded by a host command to the tape drive, prior toreceiving the Move Medium command, the media changer will issue an Unload command to the tapedrive. Therefore, the time-out value needs to be adjusted fro the maximum time a data transferelement takes to rewind and unload the cartridge.4. The Read Buffer time-out is based on a 16K-data-chunk request. Adjust the time-out value if largerdata chunks are requested.5. The Write Buffer time-out is based on a 16K-data-chunk request. Adjust the time-out value if largerdata chunks are sent.6-2 TL2000 and TL4000 SCSI Reference