Chapter 3. Supported SCSI CommandsThe media changer SCSI command set supports the following commands:Command Operation Code Standard Support StatusINITIALIZE ELEMENT STATUS 07h SMC-2 supportedINITIALIZE ELEMENT STATUS WITH RANGE 37h SMC-2 supportedINQUIRY 12h SPC-3 supportedLOG SELECT 4Ch SPC-3 supportedLOG SENSE 4Dh SPC-3 supportedMODE SELECT (6) 15h SPC-3 supportedMODE SENSE (6) 1Ah SPC-3 supportedMODE SELECT (10) 55h SPC-3 supportedMODE SENSE (10) 5Ah SPC-3 supportedMOVE MEDIUM A5h SMC-2 supportedOPEN/CLOSE IMPORT/EXPORT ELEMENT 1Bh SMC-3 supportedPERSISTENT RESERVE IN 5Eh SPC-3 supportedPERSISTENT RESERVE OUT 5Fh SPC-3 supportedPOSITION TO ELEMENT 2Bh SMC-2 supportedPREVENT/ALLOW MEDIUM REMOVAL 1Eh SPC-3 supportedREAD BUFFER 3Ch SPC-3 supportedREAD ELEMENT STATUS B8h SMC-2 supportedRECEIVE DIAGNOSTIC RESULTS 1Ch SPC-3 not supportedRELEASE (6) 17h SPC-3 supportedRELEASE (10) 57h SPC-3 supportedREPORT SUPPORTED OPERATION CODES A3h SPC-3 supportedREPORT TIMESTAMP A3h SPC-3 supportedREQUEST SENSE 03h SPC-3 supportedREQUEST VOLUME ELEMENT ADDRESS B5h SMC-2 supportedRESERVE (6) 16h SPC-3 supportedRESERVE (10) 56h SPC-3 supportedSET TIMESTAMP A4h SPC-3 supportedSEND DIAGNOSTIC 1Dh SPC-3 supportedSEND VOLUME TAG B6h SMC-2 supportedTEST UNIT READY 00h SPC-3 supportedWRITE BUFFER 3Bh SPC-3 supported3-1