SDCI 0100hSerial Monitor 0200hTNT Monitor 0400hDebug Monitor 0800hTest 1000hMN Server 2000hNetwork 4000hRMU 8000hNext table describes the possible Data types of event data.Data type of event data IdentifierBinary 00hASCII 01hTape Alert Log Page (2Eh)This page consists of the Page Header followed by 64 Tape Alert flags. Each Tape Alert flag stands for apre-determined media changer specific error condition. Tape Alert Flags range from 1 until 64. Every tagnumber has a standardized meaning. This page will not be affected by the LOG SELECT command. Thispage can be retrieved by means of a Log Sense command with PC (Page Control) set either to 00b or01b.Bit 7 6 5 4 3 2 1 0Byte0 Reserved Page Code (2Eh)1 Reserved2 (MSB) Page Length (0140h)3 (LSB)4 -32364 Tape Alert Flag structures (320 bytes)The media changer will support the following Tape Alert Flags:ParameterCodeFlag name Type Description01d LibraryHardware AC The media changer mechanism is having difficulty communicating with thedrive:v Turn the library OFF then ONv Restart the operationIf problem persists, contact Technical Support.02d LibraryHardware BW There is a problem with the media changer mechanism. If the problempersists, contact Technical Support.03d LibraryHardware CC The media changer has a hardware fault:v Make sure the media changer and drives are not being used by anyhost, then reset the library from the front panel.v If the problem persists, contact Technical Support.Chapter 3. Supported SCSI Commands 3-15
