Bit 7 6 5 4 3 2 1 0Byte0 PS (1) SPF (0) Page Code (1Dh)1 Additional Page Length (12h)2 - 3 First Medium Transport Element Address4 - 5 Number of Medium Transport Elements6 - 7 First Storage Element Address8 - 9 Number of Storage Elements10 -11First Import / Export Element Address12 -13Number of Import / Export Elements14 -15First Data Transfer Element Address16 -17Number of Data Transfer Element18 Reserved19 ReservedField descriptions:PS: Parameter Saveable. This field is set to 1. The media changer can save this page to non-volatilememory.First Medium Transport Element Address:This field indicates the address of the accessor cartridge handler (other than the default MediumTransport Element address of zero).Number of Medium Transport Elements:This field indicates the number of robotic cartridge handler within the library. The library has oneaccessor cartridge handler, set to 0001h.First Storage Element Address:This field indicates the starting address for the cartridge storage locations.Number of Storage Elements:This field indicates the total number of cartridge storage locations contained within the mediumchanger.First Import/Export Element Address:This field indicates the starting address of the first import/export element.Number of Import/Export Elements:This field indicates the total number of import/export elements contained within the mediumchanger.First Data Transfer Element:This field indicates the starting address of the installed tape drives.Number of Data Transfer Elements:This field indicates the number of tape drives contained within the medium changer.Transport Geometry Parameters page (1Eh)The Transport Geometry Parameters Page is provided in the SCSI-2 command set to determine whethereach medium transport element is a member of a set of elements in a robotic subsystem, and if the3-34 TL2000 and TL4000 SCSI Reference