Note: The TL2000/TL400 email address field cannot be empty (clear). The emailnotification setup allows the user to turn off the feature by deselecting thenotify error and notify warnings boxes. The user can add an invalid email aslong as the email address format is correct (i.e. a@xxx.xxx).E-mail DomainEnter the email domain name of the individual you would like to receivethe errors and/or warnings.SMTP Server AddressEnter the address of the email server of the individual you would like toreceive the errors and/or warnings.Configure Library: Restore DefaultsThis page allows the user to reset the configuration to the factory defaults.Note: The user must restore factory defaults when library drive configurations arechanged from a LTO full height to half height configuration in order for thelibrary to operate properly. If just adding a new drive to the configurationthe restore factory default is not required - only a power cycle of the library.Manage Library MenuManage Library: Move MediaThis page allows the user to move tape cartridges within the library. The sourceand destination are selected and then the MOVE button in the center of the screenis clicked to activate the move.The following elements appear in the Source and Destination screens.a77ug079Figure 5-44. Configure Library: Restore Defaults pagea77ug072Figure 5-45. Manage Library: Move Media pageChapter 5. Operations 5-49
