104 Removing and Installing Parts9 Replace the computer cover (see "Replacing the Computer Cover" on page 125).NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into thecomputer.10 Connect the computer and devices to electrical outlets, and turn them on.See the documentation that came with the drive for instructions on installing any software required fordrive operation.Drive PanelCAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the ProductInformation Guide.Removing the Drive Panel1 Follow the procedures in "Before You Begin" on page 75.2 Remove the computer cover (see "Removing the Computer Cover" on page 76).1 power cable 2 data cable1 2book.book Page 104 Thursday, July 20, 2006 11:10 AM
