Removing and Installing Parts 9113 Install any drivers required for the card as described in the card documentation.NOTE: If you installed a sound card or a network adapter, see "Network Adapter and Sound Card Settings" onpage 96.Removing a PCI Express Graphics Card from a Dual ConfigurationNOTE: This section regards dual configurations of PCI Express x16 graphics cards only. For removal of any othertype of PCI or PCI Express cards, see "Removing PCI and PCI Express Cards" on page 86.1 Follow the procedures in "Before You Begin" on page 75.2 Remove the computer cover (see "Removing the Computer Cover" on page 76).3 If present, press the tab on the card retention device that lays over the installed cards and rotate itupwards to gain full access to the card.4 Gently securing both graphics cards with one hand, remove the graphics card bridge (if present) withyour other hand by pulling it up and away from the computer. Set it aside.1 graphics card bridge 2 power connectors (2) 3 dual-PCI Express graphicscards132book.book Page 91 Thursday, July 20, 2006 11:10 AM
