Removing and Installing Parts 1216 Lift the socket release lever and open the processor cover.7 Remove the processor from the socket.Leave the release lever extended in the release position so that the socket is ready for the newprocessor.Installing the ProcessorNOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer.1 Unpack the new processor.NOTICE: You must position the processor correctly in the socket to avoid permanent damage to the processor andthe computer when you turn on the computer.2 If the release lever on the socket is not fully extended, move it to that position.1 processor cover 2 processor 3 socket4 socket release lever1234book.book Page 121 Thursday, July 20, 2006 11:10 AM
