346 RACADM Subcommand OverviewExamples• racadm getsysinfo -A -s"System Information:" "PowerEdge M600" "0.2.1""0.32" "48192" "dell-x92i38xc2n" "" "ON"• racadm getsysinfo -w -sSystem Information:System Model = PowerEdge M600System BIOS Version = 0.2.1BMC Firmware Version = 0.32Service Tag = 48192Host Name = dell-x92i38xc2nOS Name =Power Status = ONWatchdog Information:Recovery Action = NonePresent countdown value = 0 secondsInitial countdown value = 0 secondsRestrictionsThe Hostname and OS Name fields in the getsysinfo output display accurateinformation only if Dell OpenManage Server Administrator is installed on themanaged server. If it is not installed on the managed server, these fields maybe blank or inaccurate. An exception to this are VMware® operating systemnames which are displayed even if Server Administrator is not installed on themanaged system.getractimeTable A-10 describes the getractime subcommand.Table A-10. getractimeSubcommand Definitiongetractime Displays the current time from the remote accesscontroller.
