Configuring iDRAC6 Enterprise 45• RACADM — See "Configuring IP Filtering (IP Range)" and "ConfiguringIP Blocking"Configure Platform EventsPlatform events occur when iDRAC6 detects a warning or critical conditionfrom one of the managed server’s sensors.Configure Platform Event Filters (PEF) to choose the events you want todetect, such as rebooting the managed server, when an event is detected.• iDRAC6 Web interface — See "Configuring Platform Event Filters (PEF)"• RACADM — See "Configuring PEF"Configure Platform Event Traps (PET) to send alert notifications to anIP address, such as a management station with IPMI software or to send ane-mail to a specified e-mail address.• iDRAC6 Web interface — See "Configuring Platform Event Traps (PET)"• RACADM — See "Configuring PET"Enabling or Disabling Local Configuration AccessAccess to critical configuration parameters, such as network configurationand user privileges, can be disabled. Once disabled, the setting remainspersistent across reboots. Configuration write access is blocked for both theLocal RACADM program and iDRAC6 Configuration Utility (at boot). Webaccess to configuration parameters is unimpeded and configuration data isalways available for viewing. For information about iDRAC6 Web interface,see "Enabling or Disabling Local Configuration Access." For cfgRacTuningcommands, see "cfgRacTuning."Configure iDRAC6 ServicesEnable or disable iDRAC6 network services — such as Telnet, SSH, and theWeb server interface — and reconfigure ports and other service parameters.• iDRAC6 Web interface — See "Configuring iDRAC6 Services"• RACADM — See "Configuring iDRAC6 Telnet and SSH Services UsingLocal RACADM"
