64 Configuring iDRAC6 Enterprise4 Toggle LAN Alert Enabled to On using the spacebar.5 Enter the IP address of your Management Station into Alert Destination 1.6 Enter a name string into iDRAC6 Name with a consistent naming conventionacross your data center. The default is iDRAC6-{Service Tag}.Exit iDRAC6 Configuration Utility by pressing , , and thenpressing to save your changes. Your server will now boot into normaloperation, and it will be discovered during IT Assistant's next scheduledDiscovery pass.NOTE: You can also use Dell Management Console, the next generationone-to-many systems management application, to enable discovery and monitoring.See the Dell Management Console User’s Guide on the Dell Support site atsupport.dell.com/manuals for more information.Using iDRAC6 Web Interface to Enable Discoveryand MonitoringIPMI Discovery can also be enabled through the remote Web interface:1 Open a supported Web browser window.2 Log in to iDRAC6 Web interface using a login and password withAdministrator rights.3 In the system tree, select System→Remote Access→iDRAC6.4 Click the Network/Security tab.The Network screen appears.5 Click IPMI Settings.6 Ensure the Enable IPMI Over LAN check box is selected (checked).7 Select Administrator from the Channel Privilege Level Limit drop-downmenu.8 Enter your site's RMCP+ Encryption Key, if used.9 Click Apply if you made any changes on this screen.10 In the system tree, select System.11 Click the Alert Management tab, and then click Platform Events.
