376 RACADM Subcommand OverviewSupported Interfaces• Remote RACADM• telnet/ssh RACADMnetstatNOTE: To use this command, you must have Execute Diagnostic Commandspermission.Table A-46 describes the netstat subcommand.Synopsisracadm netstatSupported Interfaces• Remote RACADM• telnet/ssh RACADMpingNOTE: To use this command, you must have Execute Diagnostic Commands orConfigure iDRAC6 permission.Table A-47 describes the ping subcommand.Table A-46. netstatSubcommand Definitionnetstat Displays the routing table and the current connections.Table A-47. pingSubcommand Definitionping Verifies that the destination IP address is reachable from iDRAC6with the current routing-table contents. A destination IP address isrequired. An ICMP echo packet is sent to the destination IP addressbased on the current routing-table contents.
