Denon AVR-2106 Operating Instructions Manual

Also see for AVR-2106: Control protocol Operating instructions Brochure & specs Operating instructions Service manual

11Easy Setup and OperationPlaying a DVD with surround sound1 Disconnect the microphone from the unit.2 Select the input source to be played.3 Select the play (surround) mode.45 Adjust the volume.Start DVD playback.Store:Store the checked measurement values.All parameters are stored.Retry:Perform the measurement again.Measurement is repeated.4 Press the CURSOR DD or HH button to select fromthe following three items based on themeasurement results, then press the CURSOR FFbutton.Cancel:Cancel the checked measurement values.Cable indicationsSignal directionThe hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).Video cableAudio cableNOTE:• Do not plug in the power supply cord until all connections have been completed.• When making connections, also refer to the operating instructions of the other components.• Be sure to connect the left and right channels properly (left with left, right with right).• Note that binding pin-plug cables together with power supply cords or placing them near a power transformer will result in humor other noise.Analog terminal (Stereo)ARLRL(Orange)Pin-plug cableAnalog terminal (Monaural, for subwoofer)BPin-plug cableDigital terminal (Coaxial)CCoaxial cable (75 Ω/ohm pin-plug cable)Digital terminal (Optical)DOptical cable (Optical fiber cable)Speaker terminalESpeaker cableVideo terminalFVideo cable (75 Ω/ohm video pin-plug cable)S-Video terminalGS-Video cable(Yellow)Audio signalVideo signal(White)(Red)Component video terminalHComponent video cable(Y)(PB/CB)(PR/CR)(Green)(Blue)(Red)IN OUT OUT ININ OUT OUT INConnecting Other Sources