Denon AVR-2106 Operating Instructions Manual

Also see for AVR-2106: Control protocol Operating instructions Brochure & specs Operating instructions Service manual

21Basic Operation Basic OperationDTS NEO:6 mode1 Press the STANDARD button to select the DTSNEO:6 mode.DTS NEO:6DOLBY PLIIxPlay a program source.3 Press the SURROUND PARAMETER button toselect the surround parameter mode.5 Press the SURROUND PARAMETER button, andpress the CURSOR DD or HH button to select thevarious parameters.4 Turn the SELECT knob, and press the CURSORFF or GG button to select the optimum mode forthe source.STANDARD SELECTSURROUND PARAMETERFUNCTION INPUT MODE SURROUND MODESURROUNDPARAMETERSURROUNDBACKSTANDARDCURSORINPUT MODEENTERFUNCTIONThe mode switches as shown below each time the buttonis pressed.26 Turn the SELECT knob, and press the CURSORFF or GG button to set the various surroundparameters.When the surround parameters are set using the buttons onthe main unit, stop operating the buttons after completingthe settings. The settings are automatically finalized and thenormal display reappears after several seconds.7 Press the ENTER button to finish the surroundparameter mode.• When making parameter settings, the display will return to theregular condition several seconds after the last button waspressed and the setting will be completed.2 Surround parameters wDTS NEO:6 Mode:• Cinema:This mode is optimum for playing movies. Decoding isperformed with emphasis on separation performance toachieve the same atmosphere with 2-channel sources as with6.1-channel sources.This mode is effective for playing sources recorded inconventional surround formats as well, because the in-phasecomponent is assigned mainly to the center channel (C) and thereversed phase component to the surround (SL, SR and SBchannels).• Music:This mode is suited mainly for playing music. The front channel(FL and FR) signals bypass the decoder and are played directlyso there is no loss of sound quality, and the effect of thesurround signals output from the center (C) and surround (SL,SR and SB) channels add a natural sense of expansion to thesound field.CENTER IMAGE (0.0 to 1.0: default 0.3):The center image parameter for adjusting the expansion of thecenter channel in the DTS NEO:6 MUSIC mode has beenadded.Dolby Digital mode and DTS Surround(only with digital input)1 Select an input source set to digital (COAXIAL/OPTICAL) ( page 36).(Main unit) (Remote control unit)Example: DVD2 Press the INPUT MODE button to set the inputmode to “AUTO” or “DTS”.