Denon AVR-2106 Operating Instructions Manual

Also see for AVR-2106: Control protocol Operating instructions Brochure & specs Operating instructions Service manual

39Advanced Setup – Part 1 Advanced Setup – Part 13 Press the CURSOR FF or GG button to select thedesired setting.4 Press the ENTER button to enter the setting.• The “Option Setup” menu appears.This sets the amount of attenuation applied for audio outputmuting.Option SetupSetting the Muting Level2 Press the CURSOR DD or HH button to select“Muting Level” at the “Option Setup” menu,then press the ENTER button.• The “Muting Level” screen appears.• Use this to turn the on-screen display (messages other than themenu screens) “ON” or “OFF”.• Sets the on-screen display mode.Setting the On-Screen Display (OSD)1 Press the CURSOR DD or HH button to select “OnScreen Display” at the “Option Setup” menu,then press the ENTER button.• The “On Screen Display” screen appears.2 Press the CURSOR FF or GG button to select“ON” or “OFF”.–20 dB:Attenuation of the volume by –20 dB from the present level.–40 dB:Attenuation of the volume by –40 dB from the present level.– – – dB:The volume level is completely muted.3 Press the CURSOR DD or HH button to select theon-screen display mode, then press the CURSORFF or GG button to select “MODE1” or “MODE2”.4 Press the ENTER button to enter the setting.• The “Option Setup” menu appears.MODE1:Prevents flickering of the on-screen display when there is novideo signal.MODE2:Flickering is not prevented.Use this mode if the on-screen display does not appear inMODE1, which may happen depending on the TV being used.4 Press the CURSOR DD or HH button to select“Exit”, then press the ENTER button.• The “System Setup” menu appears.3 Press the ENTER button to enter the setting.• The “Advanced Playback” menu appears.1 Press the CURSOR DD or HH button to select“Option Setup” at the “System Setup” menu,then press the ENTER button.• The “Option Setup” menu appears.