Getting Started Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsENGLISHConnecting DevicesConnecting the Recording ComponentsDigital Video RecorderSelect the terminal to use and connect the device.RLRLRLRL3- 3-065 */"6%*0"6%*0 7*%&07*%&0065 */015*$"-015*$"-*/"6%*0"6%*00657*%&0 7*%&0$0.10/&/57*%&0: 1# 1 306547*%&006547*%&0*/Digital video recorderNOTETo record video signals through the AVR-4310, use the same typeof video cable for connection between the AVR-4310 and the playeras the cable used for connection between the AVR-4310 and therecorder.Do not connect the output of the component connected to the AVR-4310’s OPTICAL2 (DVR) output connector to any input connectorother than OPTICAL2 (DVR).••Set this to change the input signal to which the input source isassigned.“Input Assign” (vpage 46)Set as NecessaryFor instructions on HDMI connections, see “Connecting Devices Equipped with HDMI Terminals” on page 14.Video Cassette RecorderSelect the terminal to use and connect the device.RLRLRLRL3-065"6%*0 7*%&0"6%*03-*/"6%*0"6%*00657*%&0 47*%&00657*%&0*/7*%&0 47*%&0*/Video cassette recorderNOTETo record video signals through the AVR-4310, use the same typeof video cable for connection between the AVR-4310 and the playeras the cable used for connection between the AVR-4310 and therecorder.Set this to change the input signal to which the input source isassigned.“Input Assign” (vpage 46)Set as NecessaryFor instructions on HDMI connections, see “Connecting DevicesEquipped with HDMI Terminals” on page 14.Connections