Denon AVR-4310 Owner's Manual
Also see for AVR-4310: Service manualOwner's manual
                                                                                                                             | |
Contents
| 
Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting SpecificationsENGLISHPlaying Network Audio, USB Memory DevicesListening to Internet Radio1 Playback preparation.q Check the network environment, then turn on the AVR-4310’s power (vpage 22 “Connecting to a Home Network(LAN)”).w If settings are required, make the “Network Connecting”(vpage 38).2 Press [SOURCE SELECT] to display the GUI SourceSelect menu, then select “ ” (vpage 26).3 Set the main remote control unit to the “NET/USB”mode (vpage 86 “Operating the Main RemoteControl Unit”).4 Press ui to select the item you want to play, thenpress ENTER or p.The station list is displayed.5 Press ui to select the station, then press ENTERor p.Playback starts once buffering reaches “100%”.6 Adjust the items below.Adjusting the master volume (vpage 64)Selecting the surround mode (vpage 66)Adjusting the Sound and Picture Quality(vpage 69)nnnButton located on both the main unitand the remote control unit BUTTONButton only on the main unit Button only on the remote control unit [BUTTON]Symbols used to indicate buttons in this manualTo stop (vpage 64)Searching up or down pages (vpage 65)Searching by first letter (vpage 65)nnnThere are many Internet radio stations on the Internet, and thequality of the programs they broadcast as well as the bit rate of thetracks varies widely.Generally, the higher the bit rate, the higher the sound quality, butdepending on the communication lines and server traffic, the musicor audio signals being streamed may be interrupted. Inversely, lowerbit rates mean a lower sound quality but less tendency for the soundto be interrupted.“Server Full” or “Connection Down” is displayed if the station isbusy or not broadcasting.On the AVR-4310, folder and file names can be displayed astitles. Any characters that cannot be displayed are replaced with“. (period)”.Use the RESTORER mode to expand the low and high frequencycomponents of compressed audio files and achieve a richer sound“RESTORER” (vpage 73). The default setting is “Mode 3”.When |
Related manuals for Denon AVR-4310
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine