Denon AVR-4310 Owner's Manual

Also see for AVR-4310: Service manual Owner's manual

Contents

Denon AVR-4310 Owner's Manual Manual pdf 99 page image

Getting Started Connections Settings Playback Multi-zone Information Troubleshooting SpecificationsENGLISHSwitching Zones Setting the Zone for Which the SubRemote Control Unit is Used(ZONE SELECT LOCK Mode)1 Press [ZONE SELECT].The currently selected multi-zone indicator lights.2 While the multi-zone indicator is light, press [ZONESELECT] to select the zone to be operated.The currently selected multi-zone indicator lights. 1 Use the tip of a pen to press [ADVANCED SETUP].All the multi-zone indicators light.2 Select the multi-zone to be set.The selected multi-zone indicator lights.q To set to “MAIN ZONE” : Press [REPEAT].w To set to “ZONE2” : Press [RANDOM].e To set to “ZONE3” : Press [USB].r To set to “ZONE4” : Press [ALL MUSIC/FAVORITES].3 Use the tip of a pen to press [ADVANCED SETUP].The multi-zone indicator turns off.1 Use the tip of a pen to press [ADVANCED SETUP].The currently selected multi-zone indicator lights.2 Press [ZONE SELECT].All the multi-zone indicators light.3 Use the tip of a pen to press [ADVANCED SETUP].The multi-zone indicator turns off.Use this procedure to select the zone to be operated by the subremote control unit.We recommend always using the sub remote control unit for thesame room. When this is done, the unit can be set so that the zonedoes not switch when buttons are operated.This function is convenient for example when you want to listen to thesame song as the one playing in the MAIN ZONE while in a differentzone.Switching the Multi-zone Input Sourceto the Same Input Source as Used in theMAIN ZONE1 Press [ZONE SELECT] and set to ZONE2 or ZONE3.The currently selected multi-zone indicator lights.2 Press [M.ZONE CALL] on the sub remote control unit.The multi-zone input source switches to the MAIN ZONE’sinput source.NOTEThis cannot be used for the MAIN ZONE or ZONE4.When [M.ZONE CALL] is pressed while the multi-zone power is off,the multi-zone power turns on and the input source switches to theMAIN ZONE’s input source.••Setting the Remote IDResetting the SettingsNOTEWhen changing a setting, be sure to set the same remote ID as theAVR-4310’s (vpage 43).1 While pressing [MENU], press [ADVANCED SETUP]with the tip of a pen.The multi-zone indicator corresponding to the currently selectedremote ID flashes.2 Select the remote ID to be set.q To set to 1 : Press [REPEAT].The “M” indicator flashes.w To set to 2 : Press [RANDOM].The “Z2” indicator flashes.e To set to 3 : Press [USB].The “Z3” indicator flashes.r To set to 4 : Press [ALL MUSIC/FAVORITES].The “Z4” indicator flashes.3 While pressing [MENU], press [ADVANCED SETUP]with the tip of a pen.The multi-zone indicator turns off.While pressing [ZONE OFF], press [ADVANCED SETUP]with the tip of a pen.All the multi-zone indicators flash 4 times, then all the settings arerestored to their defaults.When using multiple DENON AV receivers in the same room, make thissetting so that no AV receiver other than the desired one operates.To CancelOperating the Sub Remote Control UnitRemote Control