Denon AVR-4310 Owner's Manual
Also see for AVR-4310: Service manualOwner's manual
                                                                                                                             | |
Contents
| 
Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting SpecificationsENGLISHPlaybackPlaying ComponentsThe following describes the procedure for playing Blu-ray disc player/ DVD player. Use the same procedure to play other components.Switch the main remote control unit to the “MAIN” mode whenperforming this operation (vpage 86 “Operating the Main RemoteControl Unit”).••Playing a Blu-ray Disc Player/DVD Player1 Playback preparation.q Turn on the power of the TV, subwoofer and player.w Switch the TV’s input to the AVR-4310.e Load the disc in the player.2 Turn the AVR-4310 power on.(vpage 23 “Turning the Power On“)3 Press [SOURCE SELECT] and select the input source.Display the source select menu (vpage 26).4 Play the component connected to the AVR-4310.Make the necessary settings on the player (language setting,subtitles setting, etc.) beforehand.5 Adjust the items below.Adjusting the master volume (vpage 64)Selecting the surround mode (vpage 66)Adjusting the Sound and Picture Quality(vpage 69)nnnBefore starting playback, make the connections between the differentcomponents and the settings on the receiver.Button located on both the main unitand the remote control unit BUTTONButton only on the main unit Button only on the remote control unit [BUTTON]Symbols used to indicate buttons in this manual Important InformationNOTEAlso refer to the operating instructions of the connected componentswhen playing them.External devices can be controlled by remote control unit (vpage86 “Operating the Connected Devices by Remote Control Unit”).••When a DENON control dock for iPod (ASD-1R or ASD-11R, soldseparately) is used, you can play images and music stored on aniPod®.Playing an iPod® Using a Control Dockfor iPodListening to music on an iPod®1 Playback preparation.q Connecting the DENON control dock for iPod to the AVR-4310 (vpage 16 “Control Dock for iPod”).w Set the iPod® in the DENON control dock for iPod.2 Turn the AVR-4310 power on.(vpage 23 “Turning the Power On“)3 Press [SOURCE SELECT] to display the GUI SourceSelect menu, then select “ ” (vpage 26).The input source switches to the source to which the controldock for iPod is assigned and the iPod menu is displayed.– GUI screen –MusicPlaylistesArtistsAlbumsSongsGenresComposers[1/6] iPodMusicVideos[1/2](When using an ASD-1R) (When using an ASD-11R)When using an ASD-11R, the “Music” and “Videos” folders aredisplayed on the top menu.Once communications between the AVR-4310 and the iPod arecompleted, the connections screen is displayed on the iPod.If the connections screen is not displayed, the iPod may not beproperly connected. Reconnect it.bbb4 Set the main remote control unit to the “iPod” mode(vpage 86 “Operating the Main Remote ControlUnit”).PlaybackENTER |
Related manuals for Denon AVR-4310
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine