Getting Started Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsENGLISHConnecting DevicesAM loop antenna assemblynRemove the vinyl tie and take outthe connection line.Bend in the reverse direction.a. With the antenna on top of anystable surface.Mount b. With the antenna attached to awall.Installation hole Mounton wall, etc.Connection of AM antennas1. Push the lever. 2. Insert the conductor. 3. Return the lever.NOTEDo not connect two FM antennas simultaneously.Even if an external AM antenna is used, do not disconnect the AMloop antenna.Make sure the AM loop antenna lead terminals do not touch metalparts of the panel.•••%&/0/-*/,"6%*0Connections to Other DevicesComponents Equipped with a DENON LINKConnectorMulti-channel playback is possible with BD, Super Audio CD, etc.(vpage 75 “Playing a Blu-ray Disc Player Compatible with DENONLINK 4th“, “Playing Super Audio CD“).Blu-ray Disc player /DVD playerWhen connecting by use of DENON LINK, set “Digital” to“D.LINK”.“Input Assign” (vpage 46)Set as NecessaryVideo Camera / Game ConsoleSelect the terminal to use and connect the device.RLRL47*%&0065"6%*07*%&07*%&0065 065015*$"-"6%*03-065Video camera / Game consoleSet this to change the input signal to which the input source isassigned.“Input Assign” (vpage 46)Set as NecessaryFor instructions on HDMI connections, see “Connecting DevicesEquipped with HDMI Terminals” on page 14.Connections