Denon AVR-4310 Owner's Manual

Also see for AVR-4310: Service manual Owner's manual

Contents

Denon AVR-4310 Owner's Manual Manual pdf 59 page image

Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting SpecificationsENGLISHTuning in Radio StationsListening to FM/AM Broadcasts1 Press [SOURCE SELECT] to display the GUI SourceSelect menu, then select “ ” (vpage 26).2 Set the main remote control unit to the “TUNER”mode (vpage 86 “Operating the Main RemoteControl Unit”).3 Press [BAND] to select “FM” or “AM”.4 Tune in the desired broadcast station.q To tune in automatically (Auto Tuning)Press [MODE] to light the “AUTO” indicator on the display, thenuse [TU d] or [TU f] to select the station you want to hear.w To tune in manually (Manual Tuning)Press [MODE] to turn off the display’s “AUTO” indicator, thenuse [TU d] or [TU f] to select the station you want to hear.5 Adjust the items below.Adjusting the master volume (vpage 64)Selecting the surround mode (vpage 66)Adjusting the Sound and Picture Quality(vpage 69)nnnIt is also possible to switch to “FM” or “AM” in step 1 by pressing[TUNER].If the desired station cannot be tuned in with auto tuning, tune it inmanually.When tuning in stations manually, press and hold [TU d] or [TU f] tochange frequencies continuously.The time (default : 30 sec) for which the GUI menu is displayed canbe set “GUI” – “Tuner” (vpage 43). Press uio p to return tothe original screen.••••To stop (vpage 64)Stopping playback temporarily (vpage 64)Fast-forwarding or fast-reversing (vpage 64)To cue to the beginning of a track (vpage 64)Playing repeatedly (vpage 64)Playing in random order (vpage 65)Searching pages (vpage 65)nnnnnnnThe Remote mode is not supported on 5th generation iPods or iPodnanos.Use the RESTORER mode to expand the low and high frequencycomponents of compressed audio files and achieve a richer sound(vpage 73). The default setting is “Mode 3”.The title name, artist name and album name can be checked bypressing during playback.The time (default : 30 sec) for which the GUI menus are displayedcan be set at “GUI” – “iPod” (vpage 43). Press uio p toreturn to the original screen.••••NOTEDepending on the type of iPod and the software version, somefunctions may not operate.DENON will accept no responsibility whatsoever for any loss of iPoddata.••“Made for iPod” means that an electronic accessory has beendesigned to connect specifically to iPod and has been certified by thedeveloper to meet Apple performance standards.Apple is not responsible for the operation of this device or itscompliance with safety and regulatory standards.iPod is a trademark of Apple Inc., registered in the U.S. and othercountries.The iPod may only be used to copy or play contents that are notcopyrighted or contents for which copying or playback is legallypermitted for your private use as an individual. Be sure to complywith applicable copyright legislation.b8 Adjust the items below.Adjusting the master volume (vpage 64)Selecting the surround mode (vpage 66)Adjusting the Sound and Picture Quality(vpage 69)nnnPlaying ComponentsListening to Preset StationsYou can also operate via the main unit. In this case, perform thefollowing operations.Press , then turn to select thepreset radio station.1 Press [A ~ G] to select the memory block.2 Press [CHANNEL] or [1 ~ 8] to select the desired presetpreset channel.Presetting Radio Stations (Preset Memory)Your favorite broadcast stations can be preset so that you can tunethem in easily. Up to 56 stations can be preset.1 Tune in the broadcast station you want to preset.2 Press [MEMO].3 Press [A ~ G] to select the block in which the channelis to be preset, then press [CHANNEL] or [1 ~ 8] toselect the preset number.The memory block can also be selected by pressing [SHIFT] onthe sub remote control unit.b4 Press [MEMO] again to complete the setting.To preset other stations, repeat steps 1 to 4.Multicasts can also be preset.Stations can be preset automatically at “Auto Preset” (vpage51).•••NOTEPreset stations are erased by overwriting them.Playback