Denon AVR-4310 Owner's Manual

Also see for AVR-4310: Service manual Owner's manual

Contents

Denon AVR-4310 Owner's Manual Manual pdf 79 page image

Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting SpecificationsENGLISHOther Operations and Convenient FunctionsWhen connected to a Blu-ray disc player compatible with DENON LINK4th, it is possible to play HD audio signals from BDs with no jitter.NOTETo play DENON LINK 4th signals, make HDMI and DENON LINKconnections with the compatible Blu-ray disc player.Set the Blu-ray disc player’s “HDMI Control” setting to “ON”, the“DENON LINK” setting to “4th”. For instructions on operation, referto the Blu-ray disc player’s manual.When a BD is played with the input mode set to “Auto”, playbackis performed in the DENON LINK 4th mode. When a disc otherthan a BD is played with the input mode set to “Auto”, playback isautomatically performed in the DENON LINK 3rd mode.When the input mode is set to “HDMI”, normal HDMI playback isperformed.When the input mode is set to “Digital”, playback is fixed to theDENON LINK 3rd mode and BDs cannot be played.•••••When playing DSD signals in the DIRECT or PURE DIRECT mode,the DSD signals are converted as such into analog signals. Whenplaying in other surround modes, the DSD signals are first convertedinto PCM format, then into analog signals.“DSD DIRECT” is shown on the display when playing DSD 2-channel signals in the DIRECT mode. “DSD MULTI DIRECT” isshown on the display when playing DSD multi-channel signals in theDIRECT mode.••1 Either assign the input source to be used to “HDMI”or assign “D.LINK” at the “Digital” setting (vpage47 “Input Assign”).2 Either turn or press [INPUTSOURCE SELECT] to select the input source assignedin step 1.The “ ” or “ ” indicator lights on the display.3 Use MODE> to select the input mode(vpage 49 “Input Mode”).Select the input mode according to the program source to beplayed.4 Select the surround mode (vpage 66 “Selecting thesurround mode).We recommend playing in the DIRECT mode.b5 Start playing the Super Audio CD.The “ ” indicator lights on the display.For operating instructions, refer to the respective equipment’soperating instructions.b1 Assign “HDMI” to the input source to be used, andassign “D.LINK” to the “Digital” setting (vpage47 “Input Assign”).2 Set “HDMI Control” – “Control” (vpage 37) to“ON”.3 Either turn or press [INPUTSOURCE SELECT] to select the input source assignedin step 1.The “ ” indicator lights on the display.4 Select “AUTO” for the (vpage 49“Input Mode”).5 Select the surround mode (vpage 66 “Selecting theSurround Mode (Surround Mode)”).6 Start playing the BD.Playback starts.Button located on both the main unitand the remote control unit BUTTONButton only on the main unit