Denon AVR-989 Owner's Manual

Also see for AVR-989: Product Compatibility Chart Service manual Comparison chart Getting started Test reports

Denon AVR-989 Owner's Manual Manual pdf 50 page image

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting SpecificationsNight ModeOptimized setting for late-night listening.Audio DelayCompensate for mismatched timing between video and audio.• This cannot be adjusted when playing in the EXT. IN, DIRECT orSTEREO mode (with “Front Speaker” set to “Large”, “Tone Control”to “OFF” and “MultEQ XT”, “RESTORER” and “Night Mode” to“OFF”.)• When the Auto Lipsync Correction function is operating, you can setwithin the range 0 ~ 100 ms.• Store “Audio Delay” for each input source.Delay audio.This sets the delay time for audio signals.[Variable range] 0 ms ~ 200 msIf you wish to adjust the “Audio Delay” while playing HDMI orcomponent video signals, press u to set “OSD” to “OFF”. This waythe audio delay can be adjusted while watching the picture. (Press uagain to switch to the on-screen display.)Operating from the main unit or remote controlunitPress AUDIO DELAY, then press o p to adjust audio delay.NOTEWhen operating by remote control, the on-screen display is notshown.For details on adjusting individual parameters, see “Adjusting the parameters” (vpage 42).Operating from the remote control unitPress [NIGHT].The “ ” indicator lights when “Low”, “Mid” or “High” isselected.OFF Low MidHighNOTE• When the “Dynamic EQ” setting is “ON”, setting is not possible.• When a HD-Audio (DOLBY DIGITAL Plus, DOLBY TrueHD, DTS-HD)signal is input, the “Night Mode” can not be selected.Set the dynamic range compression of the output audio.[Selectable items]OFF : Turn night mode off.Low : Low setting.Mid : Middle setting.High : High setting.RESTORERThis function restores compressed audio signals to how theywere before compression and corrects the sense of volume ofthe bass and treble to obtain richer playback sound.About the RESTORER function• Such compressed audio formats as MP3, WMA (Windows MediaAudio) and MPEG-4 AAC reduce the amount of data by eliminatingsignal components that are hard for the human ear to hear. TheRESTORER function generates the signals eliminated uponcompression, restoring the sound to conditions near those of theoriginal sound before compression. It also corrects the sense ofvolume of the bass to obtain richer sound with compressed audiosignals.• This is displayed on the menu and can be set when the input sourceis selected to “XM”, or analog signals (including AM/FM and SIRIUSsignals) or PCM signals (fs = 44.1/48 kHz) are input.When set to something other than “OFF”, “ ” is displayed.OFF Mode 1(RESTORER 64)Mode 2(RESTORER 96)Mode 3(RESTORER HQ)The default setting for “iPod” is “Mode3”. All others are set to “OFF”.[Selectable items]OFF :Do not use RESTORER.Mode1 (RESTORER 64):Optimized mode for compressed sources with very weak highs.Mode2 (RESTORER 96):Apply suitable bass and treble boost for all compressed sources.Mode3 (RESTORER HQ):Optimized mode for compressed sources with normal highs.Operating from the main unit or remote controlunitPress RESTORER.Setup