Getting StartedConnectionsSetupPlaybackRemote ControlMulti-zoneInformationTroubleshootingSpecifications[SOURCESELECT]INPUT MODERecording on an External Equipment(REC OUT mode)You can listen to one program source while recording a differentprogram source.1Pressuntil “ZONE2 Source”.“ZONE2 Source” is shown on the display.2Turnuntil “RECOUT Source” isdisplayed.The “” indicator lights.ZONE2 SourceZONE2 TUNERZONE2 SIRIUS····RECOUT SIRIUSRECOUT TUNERRECOUT Source······3Turnto choose the input sourceto be recorded.4Play the program source.For operating instructions, refer to the respective equipment’soperating instructions.To record FM or AM broadcasts, select the broadcast (vpage51).5Start recording.For operating instructions, refer to the respective equipment’soperating instructions.Other OperationsOther Operations and FunctionsPlaying Super Audio CD1Assign the HDMI input connector at the “HDMI”setting (vpage 38).2Either turnor press[SOURCESELECT]to select the input source assigned in step 1.The “” indicator lights on the display.3PressINPUT MODEto select “AUTO” (vpage 37).Select the input mode according to the program source to beplayed.4Select the surround mode (vpage 40 ~ 42).We recommend playing in the DIRECT mode.5Start playing the Super Audio CD.The “” indicator lights on the display.For operating instructions, refer to the respective equipment’soperating instructions.• When playing DSD signals in the DIRECT or PURE DIRECT mode,the DSD signals are converted as such into analog signals. Whenplaying in other surround modes, the DSD signals are fi rst convertedinto PCM format, then into analog signals.• “DSD DIRECT” is shown on the display when playing DSD 2-channelsignals in the DIRECT mode. “DSD MULTI DIRECT” is shown onthe display when playing DSD multi-channel signals in the DIRECTmode.PlaybackINPUT MODEButton located on both the main unitand the remote control unitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manualSurround modeSurround mode[SOURCESELECT][Front][Rear]
