Getting StartedConnectionsSetupRemote ControlMulti-zoneInformationTroubleshootingSpecifications1Either turnor press[TUNER]toselect “TUNER”.2Set[SOURCE CONTROL 1]to “AUDIO” and[SOURCECONTROL 2]to “TUNER”.(vpage 61 “Remote Control Unit Operations”)3Press[BAND]to select “FM” or “AM”.4Tune in the desired broadcast station.qTo tune in automatically (Auto Tuning)Press[MODE]to light the “AUTO” indicator on the display, thenuse[TUNING]to select the station you want to hear.wTo tune in manually (Manual Tuning)Press[MODE]to turn off the display’s “AUTO” indicator, then use[TUNING]to select the station you want to hear.Listening to FM/AM BroadcastsBasic OperationPlaying Video and AudioEquipment1Prepare the equipment.qLoad the BD, DVD, CD or other software in the player.(vSee the operating instructions of the respective equipment.)wTo play a video equipment, switch the monitor input.(vSee the monitor’s operating instructions.)2UseSOURCE SELECTto select the input source.3Start playback.(vSee the operating instructions of the respective equipment.)Basic Operation• If the desired station cannot be tuned in with auto tuning, tune it inmanually.• When tuning in stations manually, press and hold[TUNING]tochange frequencies continuously.• The time (default : 30sec) for which the on-screen display aredisplayed can be set at “Manual Setup” – “Option Setup” – “On-Screen Display” (vpage 33).Pressuiopto return to the original screen.The remote control unit can be used to operate external devices.See “Remote Control Unit Operations” (vpage 61).Presetting Radio Stations(Preset Memory)Your favorite broadcast stations can be preset so that you cantune them in easily. Up to 56 stations can be preset.1Tune in the broadcast station you want to preset.2Press[MEMORY].3Press[SHIFT]to select the block (A to G) in which thestation is to be preset.4Press[CHANNEL + –]or[NUMBER (1 ~ 8)]to selectthe preset number.5Press[MEMORY]again to complete the setting.• To preset other stations, repeat steps 1 to 5.• Stations can be preset automatically at menu “Input Setup” – “AutoPreset” (vpage 36).NOTEPreset stations are erased by overwriting them.PlaybackSOURCE SELECTuio pButton located on both the main unitand the remote control unitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manualSOURCE SELECT[SHIFT][TUNING][SOURCECONTROL 1][SOURCECONTROL 2][TUNER][CHANNEL+ –]uiopSOURCE SELECT,[NUMBER][TUNING][MODE][MEMORY][TUNER][BAND]uio p[Front][Rear]
