Denon AVR-989 Owner's Manual

Also see for AVR-989: Product Compatibility Chart Service manual Comparison chart Getting started Test reports

Denon AVR-989 Owner's Manual Manual pdf 57 page image

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting SpecificationsChecking the SIRIUS Signal Strengthand Radio IDThe strength of both the SIRIUS satellite and terrestrial signals can bechecked at menu “Input Setup” – “Antenna Aiming” (vpage 39).• The channel switches continuously when [TUNING] is pressed andheld.• The song title, artist name, composer name, category and receptionlevel can be checked by pressing .• The time (default : 30sec) for which the on-screen display aredisplayed can be set at menu “Manual Setup” – “Option Setup”– “On-Screen Display” (vpage 33).Press uio p to return to the original screen.Listening to SIRIUS Satellite RadioPrograms1 Either turn or press [SAT TU 1/2]to select “SIRIUS”.2 Set [SOURCE CONTROL 1] to “AUDIO” and [SOURCECONTROL 2] to “TUNER”.(vpage 61 “Remote Control Unit Operations”)3 Use [TUNING] to select the channel.When the channel is tuned in, the name of the song and artistare displayed.Basic OperationWhat is SIRIUS Satellite Radio?Simply The Best Radio on RadioTM with all your favorite entertainmentincluding 100% commercial-free music, plus superior sports coverage,uncensored talk and comedy, world-class entertainment, news,weather and more for your car, home or office. For more informationvisit sirius.com or siriuscanada.caSirius is available in the US for subscribers with addresses in thecontinental US and is available in Canada for subscribers with aCanadian address. Required subscription plus compatible SIRIUS tunerand antenna are required and sold separately. SIRIUS Programming issubject to change. Visit sirius.com for the most complete and up-to-date channel lineup and product information. “SIRIUS” and the SIRIUSdog logo and related marks are trademarks of Sirius Satellite Radio Inc.All rights reserved.1 Either turn or press [SAT TU 1/2]to select “SIRIUS”.2 Press until “SIGNAL” appears on thedisplay.The display will switch as shown below, depending on thereception conditions.Display StatusEXCELLENT Signal strength is excellentGOOD Signal strength is goodWEAK Signal strength is weakNO SIGNAL No signal3 Adjust the position of the antenna until “SIGNAL:EXCELLENT” is shown on the display.4 Press until the channel you want to check(example: “SR001”) is displayed.5 Press [TUNING] and select channel 0 (SR000).Channel No. and Sirius ID are alternately shown on the display.SR000 SiriusID************b Write your own SIRIUS ID for storage use.Sirius ID :Sirius IDPresetting Radio Channels(Preset Memory)Your favorite broadcast channels can be preset so that you cantune them in easily. Up to 56 channels can be preset.1 Tune in the broadcast channel you want to preset.2 Press [MEMORY].3 Press [SHIFT] to select the block in which the channelis to be preset.4 Press [CHANNEL + –] or [NUMBER (1 ~ 8)] to selectthe preset number.5 Press [MEMORY] again to complete the setting.To preset other channels, repeat steps 1 to 5.NOTEPreset channels are erased by overwriting them.Listening to Preset ChannelsSearching Categories1 Press o p.2 Use o p to select the category, then use ui to selectthe desired channel.Channel categoryPlayback1 Press [SHIFT] to select the memory block (A to G).2 Press [CHANNEL + –] or [NUMBER (1 ~ 8)] to selectthe desired preset channel.Operation on the Remote control Unit.Operation on the Main UnitPress , then turn to select the preset channel.• “LOADING” is displayed while channels or data are being received.• Refer to “Troubleshooting” – “XM Satellite Radio” regarding othermessages (vpage 79).