Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications3-065015*$"-065"6%*0"6%*0RLRL065)%.**/)%.*• To cancel, press , then turn SELECT> until “ZONE2 Source” is displayed.• Make a test recording before starting the actual recording.• Signals are only output to the analog REC OUT connectors whenthe digital signals input to the digital input connectors (OPTICAL/COAXIAL) are PCM (2-channel) signals.• Digital audio signals input to the HDMI connectors are not outputto the REC OUT connectors, so connect using the OPTICAL orCOAXIAL connectors.• Sources selected with the REC OUT mode are output from ZONE2as well.• In the REC OUT mode, the remote control unit’s ZONE2 modebuttons cannot be operated.• The “XM” digital audio output signal is not output from the OPTICAL2output connector.Convenient FunctionsHDMI Control FunctionWhen AVR-989 is connected to a TV and player compatiblewith HDMI control function, you can perform the followingoperations.Settings other than AVR-989 settings must be made on therespective devices. (Check the operating instructions of eachdevice for details.)NOTEWhen using the HDMI control function, do not assign HDMI input to “TV/CBL” by setting “Input Setup” – “Assign” – “HDMI In” in the menu.• When you want to listen to TV audio by AVR-989, connect opticaldigital or analog.If the TV you are using has both connection jacks, use the opticaldigital connection.• When using these functions set as follows: menu “Manual Setup” –“HDMI Setup” – “HDMI Control” set to “ON“ (vpage 30).• AVR-989 power off can be linked to the TV power off step.When you set “Output audio from amp” in the TV audio outputsetup operation, you can switch the amp power on.• You can switch audio output devices with a TV operation.(When outputting from the TV speakers, output switches fromspeakers connected to AVR-989).• You can adjust AVR-989 volume in the TV volume adjustmentoperation.• You can switch AVR-989 functions through linkage to TV inputfunction switching.• When playing the player, the AVR-989 input function switches to thefunction of that player.NOTE• Recordings you make are for your personal enjoyment and shouldnot be used for other purposes without permission of the copyrightholder.• Input sources for which “Delete” is selected at “Source Delete”cannot be selected.ConnectionsPlaybackPlayer compatiblewith HDMIcontrol functionTelevision compatible withHDMI control function
