Denon AVR-X4400H Manual

Also see for AVR-X4400H: Service manual Owner's manual

Contents

No video is shown on the TVNo picture appears.0 Check the connections for all devices. (v p. 73)0 Insert connection cables all the way in.0 Check that input connectors and output connectors are not reversely connected.0 Check cables for damage.0 Match the input settings to the input connector of the TV connected to this unit. (v p. 199)0 Check that the proper input source is selected. (v p. 91)0 Check the video input connector setting. (v p. 199)0 Check that the resolution of the player corresponds to that of the TV. (v p. 253)0 Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not compatible with HDCP, video will not be outputcorrectly. (v p. 290)0 To enjoy content that is copyright protected by HDCP 2.2, use a playback device and TV compatible with HDCP 2.2 only.0 The HDMI signal cannot be converted to an analog signal. Use analog connections. (v p. 291)0 To play back a 4K (60/50Hz) video, use a “High Speed HDMI Cable” or an “High Speed HDMI Cable with Ethernet”. In order to achieve a higher fidelityfor 4K (60/50Hz) videos, it is recommended to use a “Premium High Speed HDMI Cables” or an “Premium High Speed HDMI Cables with Ethernet” thathas an HDMI Premium Certified Cable label on the product package.No video is shown on the TV with the DVI-D connection.0 With the DVI-D connection, on some device combinations, devices may not function properly due to the copy guard copyright protection (HDCP).(v p. 290)Contents Connections Playback Settings Tips Appendix274Front panel Display Rear panel Remote Index