Denon AVR-X4400H Manual

Also see for AVR-X4400H: Service manual Owner's manual

Contents

o Add New FeatureDisplay new features that can be downloaded to this unit and performan upgrade.Upgrade Package: Display the items to be upgraded.Upgrade Status: Display a list of the additional functionsprovided by the upgrade.Upgrade:Execute the upgrade process.When the upgrade starts, the menuscreen is shut down. During the upgrade,the amount of upgrade time which haselapsed is displayed.0 Information regarding the “Update” function and “Add New Feature” will beannounced on the Denon website each time related plans are defined. Seethe Denon website for details about upgrades.0 When the procedure is complete, “Registered” is displayed in this menu andupgrades can be carried out. If the procedure has not been carried out, “NotRegistered” is displayed.The ID number shown on this screen is needed when carrying out theprocedure.The ID number can also be displayed by pressing and holding the main unit’su and INFO for at least 3 seconds.0 If the upgrade is not successful, “Upgrade Error” message appears in thedisplay. See “Troubleshooting” – “Update/upgrade error messages” forinformation on upgrade error messages. (v p. 285)Check the settings and network environment and then perform the upgradeagain.0 This menu cannot be selected when “Allow Update” is set to “Off”.Notes concerning use of “Update” and “Add New Feature”0 In order to use these functions, you must have the correct systemrequirements and settings for an Internet connection. (v p. 85)0 Do not turn off the power until updating or upgrading is completed.0 Approximately 1 hour is required for the updating/upgrading procedureto be completed.0 Once updating/upgrade starts, normal operations on this unit cannotbe performed until updating/upgrading is completed. Furthermore,there may be cases where backup data is reset for the parameters,etc., set on this unit.0 If the update or upgrade fails, press and hold the X on the main unit formore than 5 seconds, or remove and re-insert the power cord. Afterabout 1 minute, “Please wait” appears on the display and updaterestarts. If the error continues, check the network environment.Contents Connections Playback Settings Tips Appendix252Front panel Display Rear panel Remote Index