Denon AVR-X4400H Manual

Also see for AVR-X4400H: Service manual Owner's manual

Contents

0 When setting this to “Enhanced”, we recommend using a “Premium HighSpeed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” thathas an “HDMI Premium Certified Cable” label attached to the productpackage.0 When this setting is “Enhanced”, configure the television or playback devicesettings to match this setting.0 When this setting is “Enhanced”, video may not be output correctly dependingon the connected playback device or HDMI cable. In this case, change thissetting to “Standard”.0 “Custom” is displayed for the setting item if our service engineers or custominstallers has configured the HDMI signal format for this unit.0 “4K Signal Format” can also be set by the following procedure. However, themenu screen is not displayed. Watch the display while configuring the setting.1. Press and hold the main unit’s o and p at the same time for at least 3seconds.“zVideo Format ” appears on the display.2. Press the main unit’s i.“4K :” appears on the display.3. Use the main unit's o or p and select the 4K Signal Format.4. Press the main unit’s ENTER to complete the setting.TV FormatSet the video signal format to be output for the TV you are using.o FormatNTSC(Default): Select NTSC output.PAL: Select PAL output.0 “Format” can also be set by the following procedure. However, the menuscreen is not displayed. Following the display content to make the setting.1. Press and hold the main unit’s o and p at the same time for at least 3seconds.“zVideo Format ” appears on the display.2. Use the main unit’s o or p and set the video signal format.3. Press the main unit’s ENTER to complete the setting.NOTE0 When a format other than the video format of the connected TV is set, thepicture will not be displayed properly.Contents Connections Playback Settings Tips Appendix198Front panel Display Rear panel Remote Index