Input SelectSet the audio input mode of each input source.The input modes available for selection may vary depending on the inputsource.0 “Input Select” settings are stored for each input source.o Input ModeSet the audio input modes for the different input sources.It is normally recommended to set the audio input mode to “Auto”.Auto(Default):Automatically detect input signal andperform playback.HDMI: Play only signals from HDMI input.Digital: Play only signals from digital audio input.Analog: Play only signals from analog audio input.0 When digital signals are properly input, the ~ indicator lights on the display.If the ~ indicator does not light, check “Input Assign” and the connections.(v p. 199)0 If “HDMI Control” is set to “On” and a TV compatible with the ARC isconnected via the HDMI MONITOR 1 connectors, the input mode whose inputsource is “TV Audio” is fixed to ARC.Contents Connections Playback Settings Tips Appendix203Front panel Display Rear panel Remote Index