Denstply Sirona Sim Intego Operating Instructions Manual
                                                                                                                                        | |
Contents
| 
Dentsply SironaOperating Instructions Simulation Unit Sim Intego2 Safety instructions2.16 Modifications and extensions to the device66 09 437 D3649D3649.201.01.04.02 06.2019 152.16 Modifications and extensions to the deviceModifications to this unit which might affect the safety of the operator,users or other persons are prohibited by law.For reasons of product safety, this product may be operated only withoriginal Dentsply Sirona parts or parts expressly approved by DentsplySirona. The user assumes the risk of unforeseen modifications and ofusing non-approved parts and accessories. Dentsply Sirona is not liablefor resulting damages.All units connected to this product must comply with the applicablestandards:● IEC 61010-1 Safety requirements for electrical equipment formeasurement, control, and laboratory use● IEC 61326-1 Electrical equipment for measurement, control andlaboratory use – EMC requirements● IEC 62368-1-1 or IEC 60950-1 Safety of information technologyequipment (e.g. computer, monitor)The simulation unit monitor must fulfill the requirements of the IEC60950-1 or IEC 60950-1 standard.If a system is created during the installation, then the creator isresponsible for the conformity of the system. In accordance withDirective 2006/42/EC.2.17 Electrostatic dischargeProtective measuresESD stands for ElectroStatic Discharge.Electrostatic discharge from people can damage electronic componentswhen the components are touched. Damaged components usually haveto be replaced. Repairs must be performed by qualified personnel.Measures to protect against ESD include:● Procedures to avoid electrostatic charging via– air conditioning– air humidification– conductive floor coverings– non-synthetic clothing● discharging the electrostatic charges from your own body throughcontact with– a metallic unit casing– a larger metallic object– any other metal part grounded with the protective earth● Wearing an antistatic band that creates a connection between thebody and a protective ground wire.Areas at risk are indicated on the unit with the ESD warning label:We recommend that all persons working with this system are made awareof the significance of the ESD warning label. A training course should alsobe held to inform users about the physics of electrostatic charges. |
Related manuals for Denstply Sirona Sim Intego
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine