Denstply Sirona Sim Intego Operating Instructions Manual
                                                                                                                                        | |
Contents
| 
Dentsply SironaOperating Instructions Simulation Unit Sim Intego4 Operation4.4 Dentist element66 09 437 D3649D3649.201.01.04.02 06.2019 41ü3➢ Press favorite key 3 three times.Ä The "Stand-alone Water Supply" operating context is shown onthe EasyPad displayDisplay mode / cleanThis function switches the user interface of the dentist element SIM toinoperative.Cleanü With instruments in place: Deactivates the entire user interface ofthe dentist element➢ Press the Display mode / Clean fixed keyÄ The message "C.L.E.A.N" appears on the SIM display of thedentist element.This function switches the user interface of the dentist elementSIM to inoperative.The instruments of the dentist element can lo longer beactivated. The Sivision monitor and the camera are switchedoff.➢ Press the Display mode / Clean fixed key (> 3 s).Ä The user interfaces are now reactivated.This function is to protect them from interference from HR fields, e.g.from an external HF device, so that no functions are unintentionallytriggered during cleaning.FnA set time can be counted down to zero with the timer function.The timer is preset in theSetup of the simulation unit, see "Presettingthe timer" [→ 87].Starts and stops the timer.ü The time or speed/intensity is shown on the EasyPad display.➢ Press theFn key.Ä The timer starts immediately.The preset time counts down on the EasyPad display.Ä When the time is up, a short acoustic signal sounds.Pressing the key again stops the timer and resets the timer setting. Itcan then be restarted. |
Related manuals for Denstply Sirona Sim Intego
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine