Denstply Sirona Sim Intego Operating Instructions Manual
                                                                                                                                        | |
Contents
| 
4 Operation4.1 Putting the simulation unit into operationDentsply SironaOperating Instructions Simulation Unit Sim Intego32 66 09 437 D3649D3649.201.01.04.02 06.2019Adjusting the tilt1. Release the clamping lever.2. Move the patient simulator to the desired position.3. Tighten the clamping lever.CAUTIONDo not sit or lean on the patient simulator! This can damage the tilt orheight adjustment.IMPORTANTDo not use force to lower the patient simulator.Manual height and inclination adjustment (Sirona)Adjusting the height1. Press the foot pedal.2. Move the patient simulator to the desired position.3. Release the foot pedal.Adjusting the rotation1. Release the clamping lever.2. Move the patient simulator to the desired position.3. Tighten the clamping lever.CAUTIONRisk of crushing when adjusting the patient simulator.➢ Always use both hands to position the patient simulator.Adjusting the tilt1. Release the clamping lever.2. Move the patient simulator to the desired position.3. Tighten the clamping lever.CAUTIONDo not sit or lean on the patient simulator! This can damage the tilt orheight adjustment.IMPORTANTDo not use force to lower the patient simulator. |
Related manuals for Denstply Sirona Sim Intego
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine