Denstply Sirona Sim Intego Operating Instructions Manual
                                                                                                                                        | |
Contents
| 
4 Operation4.4 Dentist elementDentsply SironaOperating Instructions Simulation Unit Sim Intego62 66 09 437 D3649D3649.201.01.04.02 06.2019Saving intensityü The desired intensity is set.2Setup1. Press and hold the2 / Setup favorite key (> 2 s).Ä The intensity flashes on the EasyPad display.1 2Setup32. Press the favorite key 1, 2, or 3.Ä An acoustic signal sounds. The intensity set and, if applicable,activation of spray will be saved on the favorite key.A/BWhile the intensity flashes on the EasyPad display, pressing theCounterclockwise rotation / user profile key will interrupt saving to afavorite key.4.4.12 Mini LED curing lightThe function is described in the chapter on the assistant element, see"Mini LED curing light".4.4.13 SiroCam F/AF/AF+ intraoral cameraFunctionality is described in the "Sivision digital video system" section,see SiroCam F / AF / AF+ intraoral camera [→ 79].4.4.14 Timer function4.4.14.1 Timer function on the EasyPadTheFn function key is assigned to the timer function.Presetting the timerA set time can be counted down to zero with the timer function.The timer is preset in theSetup of the simulation unit, see "Presettingthe timer" [→ 87].Starting, stopping/resetting the timerü The time or speed/intensity is shown on the EasyPad display.Fn➢ Press theFn key.Ä The timer is started immediately. The preset time counts downon the EasyPad display.Ä When the time is up, a short acoustic signal sounds.Press again to stop the timer and reset the countdown. It can then berestarted. |
Related manuals for Denstply Sirona Sim Intego
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine