Denstply Sirona Sim Intego Operating Instructions Manual
                                                                                                                                        | |
Contents
| 
4 Operation4.4 Dentist elementDentsply SironaOperating Instructions Simulation Unit Sim Intego60 66 09 437 D3649D3649.201.01.04.02 06.20194.4.11 Cavitron scalerThe simulation unit can be equipped or retrofitted with the built-in scalerfrom Cavitron.Installation is done by the service technician. Contact your dental depot.The Cavitron built-in scaler is used to remove plaque.IMPORTANTPlease also read the operating instructions for the "Cavitron Built-InUltrasonic Scaler, Model G139 with Cavitron Steri-Mate 360°Handpiece“. They are enclosed with the retrofit kit.4.4.11.1 Safety InstructionsTo prevent injuries, a tip protector is included with the handpiece.CAUTIONUltrasonic tips are are very sharp.There is a risk of injuring the hand when the scaler is in the holder.➢ Always attach the tip protector to the scaler for protection as soonas you return the handpiece to the holder.CAUTIONUltrasonic tips from other manufacturers do not guarantee safeoperation.➢ Use only ultrasonic tips from Dentsply Sirona.CAUTIONThe Cavitron scaler should not be used if the incoming treatmentwater is warmer than 25 °C / 77 °F.The spray water in the handpiece can heat up further due toultrasonic vibrations.➢ Check the water temperature, especially when using thesimulation unit with self-sufficient water supply. |
Related manuals for Denstply Sirona Sim Intego
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine